01 —
Conveyor bearings & housings
Sealed-for-life housed units, plummer blocks and take-up frames in cast iron, stainless and pressed steel.
— Industries / Paper & packaging
Paper, print & packaging
Conveyor bearings, timing belts and high-cycle drive components for paper mills, converters and packaging lines.
Packaging and paper conversion lines run hot, fast and continuously — so component selection, lubrication and changeover speed determine your OEE.
We work with corrugators, label printers, flexo converters and folder-gluer operators to keep drives, conveyors and rotating equipment turning shift after shift.
— Challenges
Where paper & packaging teams ask for our help.
- C/01
High-cycle wear on timing belts and drive pulleys
- C/02
Dust ingress into bearings and electrical enclosures
- C/03
Heat build-up in long conveyor runs
- C/04
Short changeover windows for predictive maintenance
- C/05
Operator hand and cut injuries on knives and blades
- C/06
Lead-time exposure on long-lead drive components
— What we supply
A complete supply line for paper & packaging.
02 —
Timing belts & drive components
HTD, GT, polychain and v-belt drives with matched pulleys and tensioners — stocked in metric and imperial.
03 —
Cut-resistant PPE
ANSI A5–A9 cut gloves, sleeves and arm guards for knife and blade handling at speed.
04 —
Lubricants & dispensers
Single-point automatic lubricators, high-temperature greases and chain oils with usage tracking.
05 —
Planned shutdown kits
Pre-kitted bearing, belt and seal packs delivered for scheduled stoppages — no scrambling for parts on the day.
06 —
Drive engineering
Belt alignment, drive surveys and gearbox repairs from our in-house workshop.
— Standards & accreditations
Specified to the standards your auditors expect.
- FSC
- ISO 9001
- EN 388:2016+A1:2018
- EN 166
- EN 352-1
Proof point
“Saved a corrugator operator £18k a year by switching to a longer-life HTD drive and consolidating bearing supply to a single vendor.”
— Services for paper & packaging
Every discipline, tuned to your sector.
Each link opens a sector-specific landing page covering scope, lead times, standards and FAQs for paper & packaging sites.
Engineering & MRO
Gearbox repairs for Paper & packaging
Strip, inspect and rebuild reports — turned around in days, not weeks.
Drive & inverter surveys for Paper & packaging
Site walk-overs that turn ageing drive estates into a planned-replacement schedule.
Motor rewinds for Paper & packaging
AC, DC and servo motor rewinds with full test certification.
Bearing supply & repacks for Paper & packaging
SKF, FAG and NSK from stock — plus on-site repack and condition monitoring.
Pneumatics & hydraulics for Paper & packaging
FRLs, valves, cylinders and power packs — designed, supplied and tested.
Hydraulic hose assemblies for Paper & packaging
Made-to-measure hose assemblies, despatched same day from Blackburn.
Power transmission for Paper & packaging
Belts, chains, sprockets, couplings and pulleys — engineered to fit.
Lubricant supply for Paper & packaging
Greases, oils and food-grade lubricants matched to your asset register.
Fabrication for Paper & packaging
Guards, frames and stainless brackets fabricated to your drawing.
Stores & supply
Vendor-managed inventory (VMI) for Paper & packaging
We own the stores — you focus on the line.
Kanban replenishment for Paper & packaging
Two-bin systems and barcoded re-orders that never miss a line.
Kitting & assemblies for Paper & packaging
Pre-built MRO kits, labelled by job number — ready to issue.
Bonded stock for Paper & packaging
Critical spares ringfenced — billed only when you call them off.
Emergency callouts for Paper & packaging
Real engineer on the phone — not a ticket number.
Next-day UK delivery for Paper & packaging
Despatched from Blackburn — on your dock the next morning.
Compliance & calibration
UKAS calibration for Paper & packaging
Pressure, temperature, torque and electrical calibration with UKAS certificates.
Asset register management for Paper & packaging
Every asset, every certificate, one searchable portal.
Audit pack preparation for Paper & packaging
BRCGS, FSC, ISO and customer audits — paperwork ready in advance.
LOLER & PUWER consumables for Paper & packaging
Slings, shackles and lifting accessories with the certificates auditors want.
PPE supply
Gloves & hand protection for Paper & packaging
EN 388, EN 374 and food-detectable gloves stocked for next-day despatch.
Safety footwear for Paper & packaging
S1, S3 and washdown-friendly boots fitted to your workforce.
Respiratory protection for Paper & packaging
FFP3, half-mask and powered respirators with face-fit testing.
Hi-vis & workwear for Paper & packaging
EN ISO 20471 hi-vis, FR and washdown workwear — branded if you need it.
Eye protection for Paper & packaging
EN 166 safety glasses, goggles and visors fitted to risk and prescription.
Fall arrest & height safety for Paper & packaging
Harnesses, lanyards and anchor systems — inspected, tagged and documented.
— How we work with you
A four-step rhythm, from first call to ongoing supply.
- Step 01
Site & BOM review
We walk the line or take your BOM, identify cost-down opportunities and confirm specs against your audit standards.
- Step 02
Stocking plan
Bonded stock, line-side kanban bins and pre-built service kits agreed against your maintenance schedule.
- Step 03
Scheduled supply
Daily van routes or overnight palletised despatch from Blackburn — quote turnaround inside one working hour.
- Step 04
Ongoing engineering
Quarterly reviews, breakdown callouts, calibration recall and a named account engineer on the line.
<1hr
Quote response
Next day
UK delivery on stock
98.7%
On-time fill rate
24/7
Breakdown support
— Brands stocked for paper & packaging
Independent — so we specify what works, not what we're tied to.
Plus 200+ specialist brands sourced through our distributor network. Tell us the OEM spec — we'll quote a like-for-like or a documented alternative.
— FAQs
Questions we get asked.
Can you supply high-cycle drive components for converting lines?
Yes — we stock polychain GT, HTD and GT3 drives in a wide range of pitches with matched pulleys, plus the bushes, taper-locks and tensioners that go with them.
Do you offer scheduled shutdown kits?
We build pre-labelled bearing, belt, seal and consumable kits against your planned maintenance schedule so your engineers can move straight to the work on shutdown day.
What cut levels do you recommend for blade handling?
For knife and slitter handling we typically recommend ANSI A6–A9 (EN ISO Cut Level E or F) gloves with reinforced palms; we'll size up samples to your team before standardising.
Can you support out-of-hours breakdowns?
Approved accounts have access to our emergency callout service from our Blackburn warehouse, including weekend despatch by arrangement.
— Next step
Tell us what you need for your paper & packaging site.
Build a quote basket or speak directly to the engineering desk. We come back with trade pricing and lead times within one working hour.
— Services that go with the supply
More than a parts catalogue.
Engineering & fabrication
Drive surveys, bearing fitting, gearbox refurbishment and bespoke fabrication from our Blackburn workshop.
Vendor-managed inventory
Line-side bins, kanban replenishment, bonded stock and monthly usage reporting.
PPE & calibration management
Site-wide PPE programmes, UKAS calibration and inspection scheduling with downloadable certificates.
Account management
A named engineer and account manager — quarterly reviews, cost-down targets and one number to ring.
— Other sectors
More industries we serve.
- Food & beverageHygienic stainless drives, washdown motors and food-grade lubricants.View sector
- Water & wastewaterSubmersible motors, IP69K seals and corrosion-resistant fixings.View sector
- Chemical & processATEX-rated motors, magnetic couplings and sealed gear units.View sector
- Automotive & metalsHeavy-duty roller chains, planetary gearboxes and forging-grade PPE.View sector
- Renewables & utilitiesSpherical roller bearings, slew rings and offshore-grade workwear.View sector