01 —
Stainless & duplex fixings
A2, A4 and duplex 2205 bolts, washers and threaded rod for chemical and salt-water exposure.
— Industries / Water & wastewater
Water & wastewater treatment
Submersible motors, IP69K seals and corrosion-resistant fixings for water treatment, sewage and pumping stations.
Water and wastewater assets sit in some of the most aggressive operating environments in UK industry — chemically loaded, frequently submerged and often remote.
We supply pumping stations, treatment works and framework contractors with corrosion-resistant components, confined-space PPE and engineering support that survives in service.
— Challenges
Where water & wastewater teams ask for our help.
- C/01
Aggressive chemistry attacking carbon steel fixings
- C/02
Submersible motor failures from seal degradation
- C/03
Confined-space entry compliance and respiratory protection
- C/04
Long lead-times on bespoke seals and bearings
- C/05
Asset registers without calibrated test equipment records
- C/06
Remote sites without on-site stores
— What we supply
A complete supply line for water & wastewater.
02 —
Submersible motor spares
Mechanical seals, sleeve bearings, cable glands and OEM-equivalent stators for common UK pump brands.
03 —
Confined-space PPE
Gas detection, escape sets, full-body harnesses and tripod rescue kits with annual inspection support.
04 —
Chemical-resistant gloves & suits
Nitrile, neoprene and chemical Type 3/4 suits tested against your specific reagents.
05 —
Calibration portal
UKAS calibration of meters and test gear with online certificates and automatic recall reminders.
06 —
Bonded stock
Critical spares held for you at our Blackburn warehouse, called off on demand to reduce capital tied up on site.
— Standards & accreditations
Specified to the standards your auditors expect.
- WRAS
- DWI Reg 31
- IP68 / IP69K
- EN 14593
- EN 361
- ATEX Zone 2
Proof point
“Extended mean time between failure on a sludge pumping station from 11 to 28 months by switching to duplex fixings and upgraded mechanical seals.”
— Services for water & wastewater
Every discipline, tuned to your sector.
Each link opens a sector-specific landing page covering scope, lead times, standards and FAQs for water & wastewater sites.
Engineering & MRO
Gearbox repairs for Water & wastewater
Strip, inspect and rebuild reports — turned around in days, not weeks.
Drive & inverter surveys for Water & wastewater
Site walk-overs that turn ageing drive estates into a planned-replacement schedule.
Motor rewinds for Water & wastewater
AC, DC and servo motor rewinds with full test certification.
Bearing supply & repacks for Water & wastewater
SKF, FAG and NSK from stock — plus on-site repack and condition monitoring.
Pneumatics & hydraulics for Water & wastewater
FRLs, valves, cylinders and power packs — designed, supplied and tested.
Hydraulic hose assemblies for Water & wastewater
Made-to-measure hose assemblies, despatched same day from Blackburn.
Power transmission for Water & wastewater
Belts, chains, sprockets, couplings and pulleys — engineered to fit.
Lubricant supply for Water & wastewater
Greases, oils and food-grade lubricants matched to your asset register.
Fabrication for Water & wastewater
Guards, frames and stainless brackets fabricated to your drawing.
Stores & supply
Vendor-managed inventory (VMI) for Water & wastewater
We own the stores — you focus on the line.
Kanban replenishment for Water & wastewater
Two-bin systems and barcoded re-orders that never miss a line.
Kitting & assemblies for Water & wastewater
Pre-built MRO kits, labelled by job number — ready to issue.
Bonded stock for Water & wastewater
Critical spares ringfenced — billed only when you call them off.
Emergency callouts for Water & wastewater
Real engineer on the phone — not a ticket number.
Next-day UK delivery for Water & wastewater
Despatched from Blackburn — on your dock the next morning.
Compliance & calibration
UKAS calibration for Water & wastewater
Pressure, temperature, torque and electrical calibration with UKAS certificates.
Asset register management for Water & wastewater
Every asset, every certificate, one searchable portal.
Audit pack preparation for Water & wastewater
BRCGS, FSC, ISO and customer audits — paperwork ready in advance.
LOLER & PUWER consumables for Water & wastewater
Slings, shackles and lifting accessories with the certificates auditors want.
PPE supply
Gloves & hand protection for Water & wastewater
EN 388, EN 374 and food-detectable gloves stocked for next-day despatch.
Safety footwear for Water & wastewater
S1, S3 and washdown-friendly boots fitted to your workforce.
Respiratory protection for Water & wastewater
FFP3, half-mask and powered respirators with face-fit testing.
Hi-vis & workwear for Water & wastewater
EN ISO 20471 hi-vis, FR and washdown workwear — branded if you need it.
Eye protection for Water & wastewater
EN 166 safety glasses, goggles and visors fitted to risk and prescription.
Fall arrest & height safety for Water & wastewater
Harnesses, lanyards and anchor systems — inspected, tagged and documented.
— How we work with you
A four-step rhythm, from first call to ongoing supply.
- Step 01
Site & BOM review
We walk the line or take your BOM, identify cost-down opportunities and confirm specs against your audit standards.
- Step 02
Stocking plan
Bonded stock, line-side kanban bins and pre-built service kits agreed against your maintenance schedule.
- Step 03
Scheduled supply
Daily van routes or overnight palletised despatch from Blackburn — quote turnaround inside one working hour.
- Step 04
Ongoing engineering
Quarterly reviews, breakdown callouts, calibration recall and a named account engineer on the line.
<1hr
Quote response
Next day
UK delivery on stock
98.7%
On-time fill rate
24/7
Breakdown support
— Brands stocked for water & wastewater
Independent — so we specify what works, not what we're tied to.
Plus 200+ specialist brands sourced through our distributor network. Tell us the OEM spec — we'll quote a like-for-like or a documented alternative.
— FAQs
Questions we get asked.
Can you supply WRAS-approved components for potable water assets?
Yes — where required we supply WRAS-approved seals, lubricants and fixings, with declarations of conformity for your asset records.
Do you stock confined-space rescue equipment?
We supply full-body harnesses, tripods, winches, escape sets and gas monitors, and can manage annual recertification through our service partners.
Can you support remote sites without on-site stores?
Bonded stock and scheduled deliveries mean your critical spares are held by us and despatched on demand — no capital sitting on shelves at unmanned sites.
Do you calibrate test instruments?
Yes, through our calibration portal — UKAS certificates, automatic recall scheduling and downloadable evidence for your audits.
— Next step
Tell us what you need for your water & wastewater site.
Build a quote basket or speak directly to the engineering desk. We come back with trade pricing and lead times within one working hour.
— Services that go with the supply
More than a parts catalogue.
Engineering & fabrication
Drive surveys, bearing fitting, gearbox refurbishment and bespoke fabrication from our Blackburn workshop.
Vendor-managed inventory
Line-side bins, kanban replenishment, bonded stock and monthly usage reporting.
PPE & calibration management
Site-wide PPE programmes, UKAS calibration and inspection scheduling with downloadable certificates.
Account management
A named engineer and account manager — quarterly reviews, cost-down targets and one number to ring.
— Other sectors
More industries we serve.
- Food & beverageHygienic stainless drives, washdown motors and food-grade lubricants.View sector
- Paper & packagingConveyor bearings, timing belts and high-cycle drive components.View sector
- Chemical & processATEX-rated motors, magnetic couplings and sealed gear units.View sector
- Automotive & metalsHeavy-duty roller chains, planetary gearboxes and forging-grade PPE.View sector
- Renewables & utilitiesSpherical roller bearings, slew rings and offshore-grade workwear.View sector